Plotting positive and negative coordinates
Choose a maximum value of 8 and 8 mm spacing. Four-quadrant mode covers −8 through +8 on each axis.
Design your coordinate grid
Print PDF at Actual size / 100%. Select the matching paper size and turn off “Fit to page.” PNG is rendered at 150 pixels per inch. Check your printer’s minimum margin.
The same millimeter scale is used on both axes. The grid is centered on the sheet; labels and arrowheads stay inside the printer margin.
Print-size preview
215.9 × 279.4 mm · US Letter
Generated locally from your settings and original geometry or algorithms. No external datasets or uploaded fonts are used. Your entered content is not sent to a server by this tool.
How to use the Coordinate Grid Generator
- 01
Choose paper size and printer margins.
- 02
Set the maximum axis value and unit spacing; reduce either if the grid does not fit.
- 03
Choose first-quadrant or four-quadrant mode, toggle numbers, and export the page.
Examples
Introducing positive coordinates
Enable first quadrant with a maximum of 10 and 7 mm spacing. The origin moves to the lower-left corner of the grid.
Range and physical scale
In four-quadrant mode, a maximum value of 10 means 20 units across the grid. In first-quadrant mode it means 10 units. Unit spacing is measured in millimeters and remains equal horizontally and vertically.
Labels without extra plotting content
The tool prints the coordinate plane only. It does not plot functions or user points. Turn off number labels to make learners fill the scale themselves; the axis letters remain.
What to know
- Maximum axis value is 3–15; unit spacing is 4–10 mm. Large combinations may not fit.
- Each sheet contains one coordinate plane.
Common questions
Can I use different scales on x and y?
This tool uses an equal scale on both axes so geometric shapes are not stretched. It does not provide independent axis scales.
Why does the tool say the grid is too large?
The full grid plus labels and arrowheads must fit within the selected margins. Lower the maximum value or unit spacing.
Can I print an unnumbered plane?
Yes. Clear “Show axis numbers.” The grid, origin axes, and x/y labels remain visible.